Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 76)

72
m
oDel
rl/Ft5000 XP U
Ser
m
AnUAl w
/P
riSm
tm nDc e
mUlAtion
P
Urge
A
cceSS
i
nStrUctionS
:
1. From the D
iAgnoSticS
screen, select the c
ASh
D
iSPenSer
option by
pressing number <1> on the keypad.
2. From the c
ASh
D
iSPenSer
screen, select the P
Urge
option by pressing
number <2> on the keypad.
D
eScriPtion
:
The P
Urge
command allows the user to instruct the dispenser to remove all
documents from the feed path. When the purge command is used to clear the
feed path following a jam or failure of the dispenser, some or all of the notes
may pass out of the exit depending on their location in the feed path and the
type of fault condition.
Once the purge command is completed, the user will be prompted to either
repeat the purge operation or exit and go back to the Cash Dispenser menu.