Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 59)

55
P
riSm
tm nDc e
mUlAtion
S
UPerViSor
F
UnctionS
ENTER A: NDC ‘A’ KEY (master) key prompt for
non
-V
isa
(aE
VErsion
)
EPP’
s
.
WRITE A : Stores the NDC ‘A’ KEY (master) key in
non
-V
isa
(aE
VErsion
)
EPP’
s
.
ENTER B: NDC ‘B’ KEY (COMM and MAC key backup) prompt for
non
-
V
isa
(aE
VErsion
) EPP’
s
.
WRITE B: Stores the NDC ‘B’ KEY (COMM and MAC key backup) in
non
-V
isa
(aE
VErsion
) EPP’
s
:
ENTER MAC: Prompts for the 16 digit “MAC flags” that determine how
MACs are generated:
First 6 digits are the machine number (see “CONFIGURE – MACHINE
NO”)
Digit 7: ‘1’ – check the MAC and Time Variant number in Transaction Reply
messages and MAC in State and FIT config messages. ‘0’ - do not check
MAC or Time Variant numbers.
Digit 8: ‘1’ – send the MAC and Time Variant number in Transaction
Request messages. ‘0’ – do not send the MAC and Time Variant number in
Transaction Request messages.
Digit 14: ‘1’ – check the Security Terminal Number in Transaction Reply
messages. ‘0’ - do not check the Security Terminal Number in Transaction
Reply messages.
Digit 15: ‘1’- calculate the MAC for selective messages and message fields
(host configuration). ‘0’ – calculate the MAC for the whole message.
Digit 16: ‘1’ – send Time Variant number and MAC for Solicited Status
messages. ‘0’ – do not send Time Variant number and MAC for Solicited
Status messages.
KEY ENTRY: A sub-menu containing Key Management functions that is
used for non-Visa (AE version) EPP’s :