Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 24)

20
M
odel
Rl/Ft5000 Xp U
SeR
M
anUal w
/p
RiSM
tM ndc e
MUlation
**CAUTION**
The “throat” assembly on the
mechanism is not a load bearing
structure! Do not grasp or apply
any pressure to the throat.
3. Continue to support the bottom
of the cassette to keep it level as
you place it on a table or other
flat surface. If the cassette has a
loading arm, fold it down, which
will raise the rear of the cassette
and allow gravity to help keep the
notes neatly stacked during the
loading process (refer to figure
at right).
Cassette w/loading arm down.
2. To remove the selected note cassette, grasp the cassette handle with one
hand while holding the mechanism in place with the other hand (See
figures below). Pull the cassette out slightly. Place one hand underneath
to support the cassette as you slide it completely out of the unit.
R
epleniShing
c
aSSetteS
Perform cash replenishments from Prism TM NDC Supervisor Functions. S
elect
(M
ain
M
enU
) > R
epleniShMent
(o
ption
4) > a
dd
c
aSh
(o
ption
8). Refer
to the Prism TM NDC Application > Prism TM NDC Supervisor Functions
section of this manual for additional information.
R
eMoving
n
ote
c
aSSetteS
1. Open the electronic lock on the security container door and open the door
to gain access to the dispensing mechanism.
Cassette removal (Model RL5000 XP
shown).
Cassette removal.