Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 57)

53
P
riSm
tm nDc e
mUlAtion
S
UPerViSor
F
UnctionS
Pressing 37 on the (MORE) Configure functions (sub-menu options) will
display the TCP/IP Config menu
3.3.2 TCP/IP Config Menu
RMT ADDRESS: Prompts for the TCP/IP address of the NDC host system
RMT PORT NO: Prompts for the TCP/IP port number of the NDC host
system
LCL PORT NO: Prompts for the TCP/IP port number of the ATM
CONFIG AS SRV: Changes the TCP/IP server to/from ATM: ‘0’ = Host is
server, ‘1’ = ATM is server
SET ADDR/PORT NUMBER: Prompts for a number to complete the NDC
host address and port number template where the NDC host system address
and port are represented as text. The template can be configured using the
NDC Configurator.
PING ADDR NUMBER: Prompts for a number which, when combined with
the NDC host address and port template (as above), will be used to ping the
resulting IP address to test for IP connectivity.
PING IP ADDRESS: Prompts for a traditional IP address in order to ping
that address to test for IP connectivity.
Pressing <c
Ancel
> on the (
MORE
) Configure functions (sub-menu options)
will display the main (top-level) Configure menu again.