Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 102)

98
m
oDel
rl/Ft5000 XP U
Ser
m
AnUAl w
/P
riSm
tm nDc e
mUlAtion
A
DD
U
Ser
A
cceSS
i
nStrUctionS
:
1. From the D
iAgnoSticS
screen, select the P
ASSworD
m
AintenAnce
op-
tion by pressing number <4> on the keypad.
2. From the P
ASSworD
m
AintenAnce
, select the A
DD
U
Ser
option by press-
ing number <4> on the keypad.
D
eScriPtion
:
The A
DD
U
Ser
function allows adding a new user to the system. To add a
new user:
1. Select <1> on the keypad. When highlighted, enter the new user ID
consisting of 2-digits. Press <Enter>.
2. Select <2> on the keypad. When highlighted, enter the new name con-
sisting of up to a maximum of 40 alphanumeric characters. Press <En-
ter>.
3. Select <3> on the keypad. When highlighted, enter the new password
consisting of between 4-12 numeric digits. Press <Enter>.
4. Select <4> on the keypad and enter the new password a second time for
verification. Press <Enter>.
5. Select <5> to save the changes and exit.
*note*
This function is only available to personnel with
Master password access to Vendor Diagnostics.