Triton FT5000XP Prism NDC Emulation w/XFS Compliance User Manual - Manual (Page 30)

26
M
odel
Rl/Ft5000 Xp U
SeR
M
anUal w
/p
RiSM
tM ndc e
MUlation
v
eRiFY
o
peRation
1. Close and lock the security cabinet.
2. Verify the cassettes are in the dispenser. Enter Vendor
(Triton) Diagnostics from Prism TM NDC Supervisor Functions. S
elect
> d
iagnoSticS
(o
ption
7) > v
endoR
d
iagnoSticS
(o
ption
12).
3. From the (Triton) Diagnostic Menu, select c
aSh
d
iSpenSeR
(o
ption
1).
4. Refer to the figure below. Select t
eSt
d
iSpenSe
(Option 3). Enter # of
notes to be dispensed (1-5) from the individual cassettes that are installed
(“A”, “B”, “C”,or “D”). Select p
eRFoRM
t
eSt
(o
ption
5). The Test
Dispense operation will start.
5. The Test Dispense command instructs the dispenser to dispense, minimum,
one note from each installed and operational cassette into the reject
cassette. This test exercises the dispenser without sending notes to the
exit.
6. After completion of the Test Dispense, the following prompt is displayed
(see figure below).
Enter # of notes.
Test dispense prompt.