Spectra Precision FAST Survey - Manual (Page 58)

English
50
6. Tap . A new screen is displayed summarizing all your
settings.
• Site Duration: Shows the time elapsed since you started
the observation on the point
• Time Remaining is displayed only if you have selected
After (x minutes)
• Reminder on the antenna parameters used (height and
type)
• Stop Point Logging: Tap on this button to stop the
observation on the point (required if
Manually was
selected). if After (x minutes) was selected, tapping on
this button will shorten the observation.
• Monitor/Satellite View button: May be used to make sure
GNSS reception is good on the surveyed point (enough
satellites are received, DOP values low). Ignore all
RTK-related indicators. Note that making this check is
not always compatible with short static occupation
times on a point.
• Exit - Continue Logging button: Use this button if you
change your mind and you no longer want to tag the
point (and you want to continue logging the raw data
file).
7. If you stop manually, you will be asked to confirm this. A
message “Finished collecting data for this site (xx)” will
then appear. In automatic, you will get this message
directly.
8. Tap OK to close the message. This takes you back to the
initial screen where you can see that raw data are still
being collected.
9. Tap on the Close File button to end data collection and
close the raw data file.
10.Tap on the File Manager button. You should recognize the
last file in the list as the file you have just closed.
You may quit the Log Raw GPS function while letting FAST
Survey collect raw data. In this case, you will have to confirm
that you don’t want to close the raw data file.
When coming back to the Log Raw GPS function, again FAST
survey will ask you what to do about the raw data file being
currently logged.