Spectra Precision FAST Survey - Manual (Page 37)

Engl
ish
29
Network:
You need to set the Network field when a GSM modem is used.
For each GNSS receiver model, the table below lists the type
of connection you can implement (
Network field), based on
the choice you make for “ Device”.
NOTE 1: In some cases, the Network field may include the
None option. This option does not correspond to any specific
operating mode. When this option is selected, the rover will
NOT receive any corrections through whatever existing
communication channel.
NOTE 2: The internal GSM modem of the ProMark 800 and
ProFlex 800 CANNOT operate in Direct Dial (CSD mode).
Direct Dial is only possible using the data collector modem.
More information is provided below about modem settings
(see 1. below) and how to define the network the rover will
connect to. Two cases of network definitions are described:
NTRIP (see 2. below) and TCP/IP (see 3. below). An example
of Direct-Dial connection is also provided (see 4. below).
Your Choice
for “Device”
EPOCH 50 ProMark 220
ProMark
700
ProMark
800
ProFlex
800
“Internal GSM”
TCP/IP Direct
NTRIP
SpiderNet
“Data Collec-
tor Internet”
TCP/IP Direct
UDP/IP Direct
NTRIP
SpiderNet
TCP/IP Direct
UDP/IP Direct
NTRIP
SpiderNet
“Data Collec-
tor Phone”
Direct Dial
“Internet/
Phone”
TCP/IP Direct
NTRIP
SpiderNet
Direct Dial
“GSM Modem” Direct Dial