Spectra Precision FAST Survey - Manual (Page 19)

Engl
ish
11
Comms Tab
Use this tab to set the connection between the data collector
running FAST Survey and the GNSS receiver you intend to
configure as a base.
ProMark 220 being both a GNSS receiver and a data
collector, the connection between these two parts is managed
internally and automatically. That’s why the
Comms tab does
not exist for this receiver.
For all other Spectra Precision receivers, you can choose
between a Bluetooth or cable connection, as explained below.
Bluetooth Connection:
• Select “Bluetooth” in the Type field. The Device field is
automatically set to “Windows Mobile”, which is the
option that should be used in all cases.
• Tap to access the Bluetooth driver.
• Tap Find Receiver to search for and list all the Bluetooth
devices located nearby. When it’s done, you should
recognize your GNSS receiver in the list.
• Select the receiver in the list and tap to activate the
Bluetooth connection with the receiver. This takes you
back to the
Comms tab where the name of the connected
Bluetooth device now appears in the Instr field. More
information on Bluetooth is provided in How FAST Survey
Interfaces With a GNSS Receiver Via Bluetooth on page 7.
Cable Connection:
• Select “Cable” in the Type field.
• Configure the serial line (baud rate, parity, data bits, stop
bits).