Spectra Precision FAST Survey User Manual

Page 26

English

used on EPOCH 50 side can only be port 2 (COM 2).
The port used on data collector side should be defined
when setting the chosen device.

2. Setting a base as an NTRIP source (applicable to all

ProFlex and ProMark receivers):

• Depending on the receiver used, choose the

appropriate device so you can set

Network= “NTRIP”

(see the above two tables).

• Tap on

, next to

Network.

• In the

Name drop-down list, overwrite “” with

the name of the NTRIP broadcaster. Then enter the
NTRIP broadcaster’s IP address and port ID. Lastly,
enter the user name and password allowing the base to
provide corrections to this NTRIP service.

NOTE: For each new NTRIP broadcaster entry, first
select “” from the

Name drop-down list, and

then enter the NTRIP broadcaster’s parameters.
Reciprocally, when you want to delete an NTRIP
broadcaster entry, first select its name from the

Name

drop-down list and then tap on the

Delete button.

• Tap

to validate your new settings. This takes you

back to the

RTK tab.

• Further down on the screen, through

, you may as

an option provide information describing your base,
which the NTRIP broadcaster will forward to users
through the NTRIP source table. The description of an
NTRIP source includes:

Name: Base name

Identifier: Base identifier

Short Id: Abbreviated identification

Type: Base model. FAST Survey will automatically

add the names of the GNSS frequencies processed by
the base after you have saved this base entry, e.g. you
first type “Spectra Precision” in this field, and once
you have saved the entry, this field will read “Spectra
Precision L1L2”.

Format: Format of corrections generated by the base

Misc: Use this field at your convenience.

Send Rover Position to Network: Indicate whether the

base needs to acquire a rough position from a rover
before it can deliver corrections to that rover.