Spectra Precision FAST Survey - Manual (Page 49)

Engl
ish
41
To Spectra Precision Survey Office (SPSO)
• Copy the FAST Survey job (crd job) to any folder on your
computer.
• Run SPSO.
• Open the project in which you want to add the points
collected in the field with FAST Survey.
• On the SPSO menu bar, select File then Import. This opens
the Import pane on the right. SPSO lists all the files found
on the computer that may be imported to SPSO. Your crd
job file should be present in that list.
• Select your crd file and click on the Import button at the
bottom of the Import pane. Once the file has been
imported, the imported points can be seen on the job’s
Plan View.
• Save the project.
To GNSS Solutions
• Run GNSS Solutions on your office computer.
• Open the project in which to add the points from the field.
• Select Project>Download Positions from External Device..
• Select RTK Results and FAST Survey data collector.
• Click OK. This opens the Data Transfer dialog box.
• In the combo box, select ActiveSync, enable Automatic
Transfer and click OK. This opens a new window listing all
the jobs stored in the data collector.
• Select the job you want to download (e.g. “MYJOB”) and
click OK. This starts the download process.
Vector information relative to surveyed points is available only
in .rw5 files. FAST Survey saves vector information directly in
this file format and so does not create O-files that would
contain such information.
Running
Localization in an
RTK Project
Choosing the Localization Method
• With your job open in FAST Survey, tap on the Equip tab
and then on the Localization button. This opens the
Localization window with the System tab shown first.