Spectra Precision FAST Survey - Manual (Page 46)

English
38
When the remaining distance is within the stakeout
tolerance (this parameter can be changed in
Equip>Tolerances), markers appear in the four corners of
the target. You can now set a stake on this point.
6. Tap on the STORE button if you want to store the position
of this point. You will be notified if the values of HRMS
and VRMS exceed the tolerances set for these two
parameters in
Equip>Tolerances. A new screen is then
displayed showing the coordinates of both the staked and
design points.
7. Tap if you agree. The “ Point Stored” message appears
briefly. The screen then comes back to the Stake Points
screen where you can choose the next point to be staked.
8. After staking out all your points, tap in the upper-
right corner of the screen to return to the menu.
Stakeout point (target)
Provides access to
previous screen
(Select “Graph” in menu)
Your current position
and heading
Used to select which
guidance data to display
(underneath)
Used to select which
guidance data to display
for the point: coordinates
or quality data
Current status of
position solution