Lincoln Electric IM866 POWER REAM - Manual (Page 23)

Parts Replacement - 23 -
POWER REAM
Belt Replacement
Disconnect air, item 1,
and electrical supply, item2
.
Loosen (6) button head cap
screws, item 3, to remove rear
cover. (5/32‖ hex drive)
Check and note the belt tension, item 4.
Remove (2) 6mm hex head bolts,
item 5. (10 mm wrench)
Slide motor forward to slip belt off
motor gear and remove motor,
item 6.
Remove (4) button head cap screws,
item 7, to remove front cover
(5/32‖ hex drive)
Remove (4) socket head cap screws
and lock washers, item 8, from
bottom plate of motor carriage.
(3/16‖ hex drive)
Remove (2) side plates, item 9.
Lift up on the front gear, slip belt off
and remove belt, item 10.
Lift up on the front gear, slip new
belt over front gear.
Follow steps in reverse order to
reassemble unit.
Apply medium strength threadlocker
to item 5 .
9
10
1
2
3
4
5
6
8
7