Lincoln Electric IM866 POWER REAM - Manual (Page 21)

Parts Replacement - 21 -
POWER REAM
Reaming Bit Replacement
Disconnect air and electrical supply.
Hold the reaming rod, item 1, from
rotating with 5/8‖ wrench under the
washer.
Unfasten the reaming bit, item 2,
with a second 5/8‖ wrench.
Remove the reaming bit , item 3.
Insert the new reaming bit through
the flat washer , item 4.
Insert the reaming bit into the ream
rod.
Hold the reaming rod from rotating
with a 5/8‖ wrench under the
washer.
Tighten the reaming bit with a
second 5/8‖ wrench.
Reconnect air and electrical supply.
Spray Nozzle Replacement
Disconnect air and electrical supply.
Unscrew spray nozzle, item 1, by
hand.
Insert new spray nozzle.
TIGHTEN BY HAND ONLY
Reconnect air and electrical supply .
1
2
3
4
1