Elitegroup G730 - Manual (Page 76)

62
Installing the TouchPad Driver for Win2K/Me/XP
To install the touchpad driver you must first remove the
currently installed driver.
1. Insert the CD-ROM Driver into your CD-ROM drive.
2. Click “Start” and Select “Run”.
3. Type the following:
D:\Driver\Touchpad\WinME\Setup.exe (for WinME)or
D:\Driver\Touchpad\Win2K&XP\Setup.exe (for Win2K &
XP) (If D is not your CD-ROM drive, substitute D with the
correct drive letter).
4. Click on “Setup” to begin the Installation Wizard.
Follow the Wizard’s on-screen instructions to complete the
installation. Restart the system.
Manual Installation
To install the driver manually, follow the step-by-step
procedures described on each individual section for a more clear
installation.
Installing the AM303 Modem Driver for Win2K/XP
Please follow these instructions to install the Modem driver:
1. From your screen, click on the "My Computer" icon and
use your mouse or touchpad right button to select the
"Properties" item.
2. Click on the "Hardware" tab from the "System Properties"
dialog window.
3. Double click "Device Manager" tab.
4. Select the "PCI Device" in the "Other Devices" group
(denoted by a yellow mark symbol).