Elitegroup G730 - Manual (Page 34)

20
• Do not press on, or store any objects on the cover when it
is closed. Doing so may cause the LCD to break.
External CRT Display
You can hook up an external monitor through the 15-pin CRT
connector. Three configurations are available:
• LCD only
• Simultaneous display of the LCD screen and CRT monitor
• CRT only
You can switch between these display configurations by
pressing the key combination [Fn] + [F12]. For information on
connecting an external display, please refer to Chapter Four.
A Tour of the Notebook’s Keyboard
The Notebook’s keyboard uses a standard QWERTY layout
with the addition of special function keys and an embedded
numeric keypad for number intensive data entry. Your
keyboard supports Windows 98 by incorporating the two
Windows specific keys. With the two Windows 98 keys you
will be able to access and take advantage of many of the time-
saving features of Windows 98 software.
The function keys (F1-F12) on the top row of the keyboard,
serve different purposes and carry out different tasks depending
on the application you are running.
The cursor (arrow) keys (which are all located in the lower
right corner of your keyboard) and the [PgUp], [PgDn], [Home]
and [End] keys (which are located along the right edge of the
keyboard) allow you to move the active cursor of the computer
to various locations on the screen or within the document.
The embedded numeric keypad consists of 15 keys that make
number intensive input more convenient. Like the [Num Lock]
key, these keys are labeled in blue on the keycaps. Numeric
assignments are located at the upper right of each key.