Elitegroup G730 User Manual
Page 70
56
The next time you bootup the Notebook, the BIOS will attempt
to load the values you saved in Non-Volatile memory. If these
values cause the system boot to fail, reboot and press [F2] to
enter the Setup program.
Once in Setup, you can try to change the values that caused the
system boot to fail. If the problem persists, load the default
values as described below.
NOTE:
If you attempt to exit the Setup program without
saving your changes, the program will prompt you with a
message asking if you want to save your changes before
exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the
changes you have made to the Setup program. If you have
made changes to the fields other than system date, system time
and password, the system will ask for confirmation when
choosing Exit Discarding Changes.
Warning
Configuration has not been saved!
Save before exiting?
[Yes] [No]
Select Yes to save changes and exit the BIOS setup program,
select No to exit BIOS without saving your changes, or press
[Esc] to return to the Exit menu.
Load Setup Defaults
This option allows you to load the default values for each of the
parameters on the Setup menus.
Setup Confirmation
Load default configuration now?