Elitegroup G730 - Manual (Page 10)

viii
y The cord set must be approved for the country in which
it is used.
y The appliance coupler must have a configuration for
mating with a CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
y The cord set must be UL Listed and CSA Certified.
y The minimum specifications for the flexible cord are No.
18 AWG.
B. For Japan:
y All components of the cord set must bear a “ T ” mark
and registration number in accordance with the Japanese
Dentori Law.
y The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
y The cord set fittings must bear the certification mark of
the agency responsible for evaluation in a specific
country.
y The flexible cord must be of a HAR (harmonized) type
H03VV-F.
y The cord set must have a current capacity of a least 2.5
Amperes and voltage rating of 125 or 250 Vac.
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These
precautions includes the following:
1. Do not use this product near water, for example, near a
bathtub, wash bowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the
vicinity of the leak.