Elitegroup G730 - Manual (Page 54)

40
Accessing the BIOS Setup Program
To access the BIOS Setup program, press the F2 key after the
Notebook has run through its POST.
Item Specific Help
On the right side of the Setup screen is an area labeled Item
Specific Help. This area will list navigation key shortcuts and
information that is specific for the item that you are currently
editing.
The Menu Bar
The top of the screen has a menu bar with the following
selections:
• Main - Use this menu to make changes to the basic system
configuration.
• Advanced - Use this menu to enable and make changes to
the advanced features available on your system.
• Security - Use this menu to set a password. The password
allows bootup and controls access to the BIOS setup menu.
• Boot - Use this menu to configure the default system
device used to locate and load the Operating System and
for booting up the Notebook.
• Exit - Use this menu to exit the current menu or specify
how to exit the Setup program.
To access the menu bar items, press the right or left arrow key
on the keyboard until the desired item is highlighted.
The Legend Bar
At the bottom of the Setup screen you will notice a legend bar.
The keys in the legend bar allow you to navigate through the