Rice Lake Condec UMC600 - Manual (Page 57)

54 UMC600 Installation Manual
Table 6-7. Truck Mode Descriptions
Transaction buffers: View/Print/Clear
Tare Recall: Provides viewing of entered identification
numbers. Each push will step to the next ID. When
donE appears, that is the end of the buffer.
Print: Pressing print with identification displayed will
cause output (print) of the whole buffer.
CE: Pressing clear entry with identification displayed
will clear that location. Consecutive clear entries until
donE prompt appears, will clear entire buffer.
The transmission of serial data can be initiated in either
demand mode, continuous mode, or RS485.
Mode Functional Description
Full Truck In mode Transaction begins with a full truck (gross weight) entering landfill, and leaves empty (tare weight).
The transaction uses the following steps.
1. Truck enters the scale full. Scale settles out of motion.
2. Driver inserts ticket and presses PRINT .
3. Display responds with ID No prompt.
4. Driver enters truck ID number (6 digit maximum).
5. Driver presses ENT .
6. Ticket prints: ( xxxxxx ) ID. NO ( xxxxx ) LB GR
7. Truck goes to landfill and empties load.
8. Empty truck returns to scale and gives ticket to operator. Scale settles out of motion.
9. Driver presses PRINT key and ID No. prompt appears.
10. Driver enters same ID number as printed on the ticket, then presses ENT .
11. Printer prints final transaction which includes ID Number, Lb Gr recall, Tare, NT
Empty Truck In mode Transaction begins with an empty truck (tare weight) entering ie: gravel pit, enters the scale, is filled, and
is then weighed full (gross weight) on the way out.
The transaction uses the following steps.
1. Empty truck enters the scale. Scale settles out of motion.
2. Driver inserts ticket and presses PRINT .
3. Display responds with ID No prompt.
4. Driver enters truck ID number (6 digits maximum)
5. Driver presses ENT .
6. Ticket prints: ( xxxxxx ) ID. NO ( xxxxx ) LB GR
7. Truck exits scale and fills.
8. Truck re-enters scale and the driver puts ticket back in the printer. Scale settles out of motion.
9. Driver presses Print key and ID No. prompt appears.
10. Driver enters same ID number as printed on the ticket
11. Driver presses Ent .
12. Printer prints final transaction which includes ID Number, Lb Gr recalled Tare, Lb NT
Fixed Tare Mode Many truck weighing applications require the entry of a known fixed (manual) tare weight when the truck
is on the scale; the advantage of a fixed tare function is that the truck needs to go over the scale only
once.
The fixed tare entry function operates as follows:
1. Truck enters the scale full. Scale settles out of motion.
2. Driver inserts ticket and presses PRINT .
3. Display responds with ID No prompt.
4. Driver enters truck ID number (6 digits maximum).
5. Driver press the TARE key not the ENT key as in previous transactions.
6. Display responds with a
tAre
prompt, asking for a fixed tare entry.
7. Driver enter the truck tare weight.
8. Driver press ENT .
9. Printer prints transaction which includes ID Number, Lb Gr, Lb Tr keyed, Lb NT