Rice Lake Condec UMC600 - Manual (Page 5)

2 UMC600 Installation Manual
1.1 Front Panel Keypad and Annunciators
Figure 1-1 shows the UMC600 front panel. The UMC600 display consist of six seven-segment display digits.
Table 1-1 lists the front panel keys and their functions.
Figure 1-1. UMC600 Front Panel
1
6
2
7
3
8
4
9
5
0
CE
ENT
TARE
RECALL
NET
GROSS
TARE
lb/kg
CONV
PRINT
1 SET
POINT
2 SET
POINT
CAPACITY 5000 lb. X 0.5
ZERO
NET
GROSS
lb
kg
MOTION
ZERO
Low Battery Annunicator
Panel Key Function
ZERO Provides push-button auto zero (PAZ) over ±1.9% or 100% full scale capacity. Operates only in gross
weighing mode.
GROSS/NET Switches the unit between gross and net weighing modes.
TARE Provides push-button tare entry over 100% of scale capacity. Pressing TARE key switches to net mode
and enters tare.
PRINT Provides a manual print function if unit is wired to serial printer or other data device. Also initiates truck
in/out weighing function if that feature is enabled. See Section 3.2 on page 20 for serial output
specifications.
lb/kg CONV Switches the displayed weight unit between pounds and kilograms.
TARE RECALL Press to recall tare value; LED annunciator lit when tare value is displayed. Also used as ID RECALL in
t ruck weighing mode.
ON/OFF Provides power to the indicator.
NOTE: On AC units, the ON/OFF switch is replaced by the blank key which becomes a start
key in setpoint batching modes.
SETPOINT 1 & 2 Push to enter or recall associated setpoint values.See Section 6.0 on page 49 for details.
0–9, CE, ENT Numeric keyboard for entry of manual tare, setpoint values, and calibration data. CE (Clear Entry) and
ENT (Enter) keys.
Table 1-1. Front Panel Key Functions