PreSonus StudioLive Remote - Manual (Page 61)

57
Addendum for
StudioLive Mixers
Ov
er
view
Univ
ersal
Con
trol and VSL
StudioLiv
e
Remot
e
QMix
Troubleshooting 5
Tr
oubleshooting
5.3 StudioLive Remote
Cannot Edit Channel Labels.
Verify, in the VSL Setup Tab, that the device has permission to edit channel labels.
Tap Tempo Is Not Available.
Make sure that a delay has been loaded on that effects bus. The
Tap Tempo button will not appear if a reverb is loaded.
Cannot Connect to VSL.
Verify that the computer running VSL is not connected to a wireless
router or to another network with an Ethernet cable. VSL does not
support connections to two networks at the same time.
5.4 QMix
Cannot Edit Channel Labels.
Verify, in the VSL Setup Tab, that the device has permission to edit channel labels.
Cannot Open the Wheel of Me or Aux Mix Page.
Verify that the Orientation Lock button is not enabled on the current page.
Wheel of Me Indicators Do Not Show Level for “Me” or “Band.”
The “BAND” indicator will not show any level until you create an aux mix
on the Auxes page. The “ME” indicator won’t show any level until at least
one channel is selected on the Me Channels page. If all channels in the aux
mix are selected on the Me Channels page, level will only be shown in the
“ME” indicator, and no level will be shown in the “BAND” indicator.
.