PreSonus StudioLive Remote - Manual (Page 28)

24
Ov
er
view
QMix
Troubleshooting
PreSonus Universal Control 1.6,
StudioLive Remote 1.3, and QMix 1.1
2 Universal Control 1.6 with VSL
Univ
ersal
Con
trol and VSL
2.5 VSL: Virtual StudioLive
StudioLiv
e
Remot
e
Flexible Inputs Router Patches Inputs 15/16 or Main L/R Mix to FireWire Inputs 15/16 (StudioLive 16.0.2 only).
The StudioLive 16.0.2 allows you to choose between recording analog
inputs 15 and 16 or the main bus. This is done via the Flexible Inputs
Router on the Setup tab. By default, your StudioLive is configured to
record inputs 15 and 16 on FireWire sends 15 and 16. To record the
main-bus mix instead, simply repatch the main bus to FireWire sends 15
and 16, using the Flexible Inputs Router.
The main bus is automatically set to send its signal post-Fat
Channel dynamics processing and post-EQ (where applicable).
No matter which source is selected in the Flexible Inputs Router,
you will see inputs 15 and 16 in your recording application.
Note: In order to use the Smaart Spectra tools, you must patch
the Main Mix to the Flexible Inputs. When analog inputs 15/16
are patched, the Smaart controls will not function.
MIDI Control Mode Menu Configures MIDI Control Mode Functions (StudioLive 16.0.2 only).
MIDI Control mode is a powerful feature that allows you to control key
StudioLive 16.0.2 parameters remotely, using a MIDI controller or DAW.
This menu corresponds directly to the MIDI Control mode pages in the
System menu on your StudioLive.
See Section 5.5 in the StudioLive 16.0.2 Owner’s
Manual for complete details.
Noise Gate Mode Sets Function of Fat Channel Noise Gate (StudioLive 16.4.2 only).
The StudioLive 16.4.2 lets you choose between an expander and a noise
gate for each pair of channels. The Noise Gate Mode menu on the Setup
tab corresponds directly with the Gate Type page in the System menu on
your StudioLive.
Scene Recall Filters Sets Which Parameters are Recalled with a Scene.
Your StudioLive allows you to decide which group of parameters you
would like to recall with a Scene. The Scene Recall menu on the Setup tab
corresponds directly with the Scene Recall menu on your StudioLive.