Yokogawa Value Series FX1000 - Manual (Page 76)

2-63
IM 04L21B01-64EN
Configuring the FX1000
1
2
3
8
Index
• Register
Set the register number of the server.
For an input register, select in the range of 30001 to 39999 and 300001 to 365536.
You can specify a hold register in the range of 40001 to 49999 or 400001 to 465536.
The register numbers you can specify vary depending on the command type. See
section 6.3 in the FX1000 Communication Interface User’s Manual, IM 04L21B01-
17EN.
• Type
Select INT16, UINT16, INT32_B, INT32_L, UINT32_B, UINT32_L, FLOAT_B, or
FLOAT_L.
The type you can specify vary depending on the command type. See section 6.3 in
the FX1000 Communication Interface User’s Manual, IM 04L21B01-17EN.
2.6 Entering Basic Settings