Yokogawa Value Series FX1000 - Manual (Page 61)

2-48
IM 04L21B01-64EN
• Domain Name
Set the network domain name that the FX belongs to using up to 64 characters. This
is enabled when “DNS accession” is set to [Not].
• Server Primary, Server Secondary
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain Primary, Domain Secondary
Set up to two domain suffixes: primary and secondary.
Control
• Keep Alive
To disconnect when there is no response to the test packets that are periodically sent,
select [ON]. Otherwise, select [OFF].
• Time out
To use the application timeout function, select [ON]. Otherwise, select [OFF]. If you
select [ON], a [Timeout time] is displayed.
• Timeout value (min.)
Set the timeout value between 1 and 120 (minutes).
• Host-Name Register
To automatically register the host name, select [ON].
Checking the communication status
The Ethernet communication status can be confirmed with the LED lamp that is provided
on the Ethernet connector on the FX rear panel or the [Ethernet link] that is shown at the
upper right of the basic setting screen.
2.6 Entering Basic Settings