Yokogawa Value Series FX1000 - Manual (Page 47)

2-34
IM 04L21B01-64EN
• Date format
Settings Display Example
Y/M/D 2011/11/30
M/D/Y 11/30/2011
D/M/Y 30/11/2011
D.M.Y 30.11.2011
Applied Range
The format is applied to the date displayed on the screen. It does not change the
date format on the setup screen of the date/time, the date in the output data via
communications, the date saved along with the data, and the date used in the data file
names.
• Service port
The following table indicates the number of simultaneous uses (number of users that
can use the function simultaneously), the maximum number of connections, and the
port number for each function.
Function Maximum
Number of
Connections
Number of Simultaneous Uses Port No.
Administrator User
FTP server 2 2 2 1 21/tcp 2
Web server (HTTP) 1 – – 80/tcp 2
SNTP server – – – 123/udp 2
Modbus server 2 – – 502/tcp 2
1 There are user limitations. For details, see the FX1000 Communication Interface Manual (IM
04L21B01-17EN).
2 The default port number. You can set the value in the range of 1 to 65535. Use the default
port number unless there is a special reason not to do so.
• Status Relay Details
Memory/Media Information, Measurement Error, Communication Error,
Memory Stop
The relay contact output is turned on when an item that is set to [ON] occurs.
2.6 Entering Basic Settings