Yokogawa Value Series FX1000 - Manual (Page 15)

2-2
IM 04L21B01-64EN
Creating Setup Data by Configuring a New System
1. Click the [New] button, or choose [File] - [New] from the menu bar.
The [System Configuration] dialog box opens. Click the [FX1000] tab.
Item Setting Explanation
Channel 2CH FX1002
4CH FX1004
6CH FX1006
8CH FX1008
10CH FX1010
12CH FX1012
Firm.Version (Version number) FX firmware version *
Math ON /M1 option
Serial RS-232 /C2 option
RS-422/485 /C3 option
Media NONE No CF card slot
CF CF card slot present
Alarm Relay 2 Point /A1 option
4 Point /A2 option
6 Point /A3 option
12 Point /A4A option
FAIL FAIL and status output relays /F1 option
Remote /R1 option
Pulse /PM1 option
Calibration correction /CC1 option
Ext input /N3F option
USB /USB1 option
Ethernet /C7 option
LOG scale display /LG1 option
Power Monitor /PWR1 option
* Select the number of the FX1000 firmware. If the firmware version is R1.11, select [Version
1.10] from the list.
2. Enter all settings on the [FX1000] tab, then click the [OK] button. The FX setting
screen in displayed.
2.1 Displaying Setup Data