Yokogawa Value Series FX1000 - Manual (Page 14)

2-1
IM 04L21B01-64EN
Configuring the FX1000
1
2
3
8
Index
2.1 Displaying Setup Data
The Hardware Configurator can transmit and receive the setup data, change the setup
data, and create new setup data. The settings on the setting screen vary depending on
the specifications of the connected FX.
The setting screen may differ from your actual screen.
Loading Setup Data from the FX
This procedure can only be performed on FXs that have a communication interface (/C2,
/C3, or /C7 option). Before performing the following procedure, please make sure that the
communication method and parameters are correct.
1. Click the [Receive Data] button, or select [Comm.] - [Receive Setting] from the
menu bar.
The [Network] dialog box appears.
2. Enter the parameters, and click the [OK] button.
The [Receive Data] dialog box appears.
3. Click the [OK] button.
The software receives the setup data from the FX and displays it.
Chapter 2 Configuring the FX1000