Yokogawa Value Series FX1000 - Manual (Page 5)

iv
IM 04L21B01-64EN
How to Use This Manual
Structure of the Manual
This manual consists of the following three chapters and index.
Chapter Title Content
1 Before using the DAQSTANDARD Explains the PC system environment required for
use of the DAQSTANDARD. Also explains how to
install it.
2 Configuring the FX1000 Explains how to configure the FX1000
measurement conditions and other settings.
3 Troubleshooting Gives a list of error messages and corrective
measures.
Index Gives a list of important terms used in this
manual.
Scope of this Manual
This manual does not explain the basic operations of your PC’s operating system (OS).
For such descriptions, refer to the Windows User’s Guide etc.
Conventions Used in This Manual
• Unit
K .................... Indicates “1024”. (Example: 100 KB)
• Menus, commands, dialog boxes and buttons
Enclosed in [ ].
• Note
Provides useful information regarding operation of the software.
About Images
The images that appear in this manual may be different from those that appear on the
software, but not to a degree that interferes with procedural explanations.
Products Covered in This Manual
Item Described in This Manual
FX1000 Up to firmware version R1.1x.
In the explanations in this manual, this is referred to as the “FX.”
DAQSTANDARD for FX1000
Hardware Configurator
Up to version R9.03.xx.
Revision History
Edition Additions and Changes
1 New edition
2 Revised for upgrade to 9.02 Release: (Added) Italian, Spanish, Portuguese, Russian,
and Korean as display language.
Improvements to descriptions.
3 Revised for upgrade to 9.03 Release: (Added) Pseudo log and nonlinear log settings
of the FX1000 (firmware version R1.11 or later.)
Improvements to descriptions.