Yokogawa Value Series FX1000 - Manual (Page 11)

1.4 Menu Bar and ToolBar
Menu Bar
Only the menu items that can be selected are available.
Menu Description
File New Creates new setup data.
Open Opens setup data that has been
saved in the past.
Save Overwrites the current file.
Save As Saves to a specified file name.
Restore Original See the explanation later in this
section.
Print Format Settings See section 1.5.
Print Prints data.
Print Preview Displays a print preview.
Print Setup Set up the printer.
Exit Exits the software.
Comm.* Receive Setting Receives setup data from the
recorder.
Send Setting Sends setup data to the recorder.
Action Hardware Info Receives the device information
from the recorder and displays it.
Memory&Math Start Starts memory sampling.
Memory&Math Stop
Stops memory sampling.
Partial Transfer Address Settings See section 2.7.
Setting Meas Channels This item appears for the FX.
Math Channels
Ext. Channels
Not used.
General Setting (Submenu) This item appears for the FX.
Basic Setting (Submenu)
Initialize
Load Changed Settings
See the explanation later in this
section.
Setting
Mode
SET (Regular)
Setting
(Submenu) Not used.
SETUP (Basic)
Setting
(Submenu)
Initialize
Control
Setting
SET (Regular)
Setting
(Submenu) Not used.
SETUP (Basic)
Setting
(Submenu)
Program Pattern
Setting
(Submenu)
System System Configuration Set the setup data system
configuration.
Data Adjustment Not used.
View Standard Toolbar Shows or hides the toolbar.
Status bar Shows or hides the status bar.
Data Adjustment Dialog Not used.
Help About Shows the version. See section 1.6.
User’s Manual Shows the user’s manual.
* This can only be used on FXs that have a communication interface (/C2, /C3, or /C7 option).
1-4
IM 04L21B01-64EN