Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 86)

IM 11M12A01-03E 5-14
5.7.1 Cable Specifications
Use a three-core cable for this wiring.
5.7.2 Wiring Procedure
M4 screws are used for the terminals of the converter. Each cable should be terminated
in the corresponding crimp-on terminals. M4 screws are used for the terminals of the
solenoid valve as well.
Converter
ZR40H Automatic
Calibration unit
AC-Z
AC-C
AC-S
Zero
Span
F5.13.EPS
Figure 5.13 Wiring for Automatic Calibration Unit