Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 127)

IM 11M12A01-03E 8-15
8. Detailed Data Setting
8.4.3 Default Values
When the analyzer is delivered, or if data are initialized, alarm and other setting are
defaults as shown in Table 8.7.
Table 8.7 Output Contact Default Settings
Alarm
settings
Other
settings
᭺: Present
Note: Blank boxes in the above table indicate that the default is “disabled“.
᭺
᭺
᭺
᭺
᭺
᭺
T8.7E.EPS
(default) (default) (default)
Item Output Output Output Output
contact 1 contact 2 contact 3 contact 4
High-high-
limit alarm
High-limit
alarm
Low-limit
alarm
Low-low-
limit alarm
Calibration
coefficient alarm
Startup power
stabilization
timeout alarm
Error
Warm-up
Output range
change
Calibration
Maintenance
Blow-back
High-limit
temperature
alarm
Calibration-
gas press. low
Process
upset
Operating Open Closed Closed Closed
contact (fixed)
status