Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 117)

IM 11M12A01-03E 8-5
8. Detailed Data Setting
8.1.5 Default Values
When the analyzer is delivered or reset to defaults, the output current default settings are
as shown in Table 8.1.
Table 8.1 Output Current Default Values
Item Default setting
Min. oxygen concentration 0% O
2
Max. oxygen concentration 25% O
2
Minimum humidity conc. 0% H
2
O
Maximum humidity conc. 25% H
2
O
Minimum mixing ratio 0.000 kg/kg
Maximum mixing ratio 0.2 00 kg/kg
Output damping constant 0 (seconds)
Output mode Linear
T8.1E.EPS