Validation and calibration – Yokogawa In-Situ Gas Analyzer TDLS200 User Manual
Page 110

8-10
IM 11Y01B01-01E-A 6th Edition :Feb 13, 2013-00
<8. VALIDATION AND CALIBRATION>
MANUAL OffLINE VALIDATIONS
Enter into the Advanced Menu, Calibrate &
Validate section, Off-Line Validations.
Choose Check gas 1, 2 or two gas validation
and select Manual Validation.
Following the on screen directions, enter
in the pressure, temperature, cell length, &
concentration of the gas within the off-line line
check gas flow cell. Press Enter to proceed.