Yokogawa ADMAG AXF - Manual (Page 66)

IM 01E20D01-01E 6-4
6. OUTLINE
Size of AXF Flowtubes: AXF Standard (Lay length code 1) (continued)
PFA
15 (0.5), 25 (1.0),
32 (1.25), 40 (1.5)
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0), 250 (10),
300 (12) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0) 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0)
—
Polyurethane
Rubber
Wafer
Submersible
Type
—
25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0),
250 (10), 300 (12) 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0)
— — —
PFA
Polyurethane
Rubber Flange
15 (0.5), 25 (1.0),
32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0), 250 (10),
300 (12), 350 (14),
400 (16) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0) 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0)
—
25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0)
— —
—
—
Sanitary Type
Clamp:
Tri-Clamp (*4),
DIN32676
ISO2852/SMS3016
Union:
DIN11851
ISO2853 (*5)
SMS1145 (*6)
Butt Weld:
DIN11850, ISO203
PFA
15 (0.5), 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0), 100 (4.0),
125 (5.0) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0)
—
*1: AXF standard lay length dimensions for wafer type ceramics linings are the same as those for ADMAG ceramics linings.
*2: AXF standard lay length dimensions for union joint type ceramics linings are the same as those for ADMAG ceramics linings.
*3: Enhanced dual frequency excitation is not available for models with High grade accuracy.
*4: Not available with 32 mm (1.25 in.), 125 mm (5.0 in.)
*5: Not available with 125 mm (5.0 in.)
*6: Not available with 15 mm (0.5 in.), 125 mm (5.0 in.) T21.EPS
PFA
2.5 (0.1), 5 (0.2), 10 (0.4), 15 (0.5), 25 (1.0),
32 (1.25), 40 (1.5), 50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0), 125 (5.0), 150 (6.0),
200 (8.0), 250 (10), 300 (12) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0) 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0)
—
Ceramics
(*1)
15 (0.5), 25 (1.0), 40 (1.5), 50 (2.0),
80 (3.0), 100 (4.0), 150 (6.0), 200 (8.0)
—
25(1.0),40(1.5),50(2.0),
80(3.0),100(4.0),
150(6.0),200(8.0) 25 (1.0), 40 (1.5),
50 (2.0), 80 (3.0),
100 (4.0), 150 (6.0),
200 (8.0)
Wafer
Explosion
proof Type
PFA
2.5 (0.1), 5 (0.2), 10 (0.4), 15 (0.5),
25 (1.0), 32 (1.25), 40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0), 100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0), 250 (10), 300 (12),
350 (14), 400 (16) 25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0) 25 (1.0), 32 (1.25), 40 (1.5),
50 (2.0), 65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0)
— Flange
Union Joint Ceramics (*2) 2.5 (0.1), 5 (0.2), 10 (0.4) — — —
Natural Soft
Rubber
50 (2.0), 65 (2.5),80 (3.0),
100 (4.0),125 (5.0),
150 (6.0), 200 (8.0),
250 (10), 300 (12)
50 (2.0), 65 (2.5),80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0),
250 (10), 300 (12)
—
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0)
—
EPDM
Rubber
—
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0)
—
25 (1.0), 32 (1.25),
40 (1.5), 50 (2.0),
65 (2.5), 80 (3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0),
250 (10), 300 (12),
350 (14), 400 (16),
500(20), 600 (24),
700 (28), 800 (32),
900(36), 1000(40),
1100(44), 1200(48),
1350(54), 1500(60),
1600(64), 1800(72),
2000(80), 2200(88),
2400(96), 2600(104)
—
—
Natural Soft
Rubber
50 (2.0), 65 (2.5), 80(3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0), 250 (10),
300 (12), 350 (14), 400 (16)
50 (2.0), 65 (2.5), 80(3.0),
100 (4.0), 125 (5.0),
150 (6.0), 200 (8.0), 250 (10),
300 (12), 350 (14), 400 (16)
—
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0)
—
EPDM
Rubber —
50 (2.0), 65 (2.5),
80 (3.0), 100 (4.0),
125 (5.0), 150 (6.0),
200 (8.0)
—
—
—
Use Process Connection Lining Remote Flowtube Integral Flowmeter
High Grade
Accuracy 0.2% of
Rate (*3)
Enhanced Dual Frequency
Excitation
(Optional code HF1,HF2) (*3)
Replaceable Electrode
(Electrode structure code 2)
Unit: mm (in.)