Yokogawa EJX930A - Manual (Page 83)

ii
IM 01C25R01-01E
Edition Date Page Revised Item
8th Aug. 2011 1-1, 2-3 and 10-4
2-4
3-9
7-8
10-1 to 10-4
10-5, 10-6, 10-9
and 10-11
1, 2.3, 2.4, 10.1
Change FSA120 product name.
2.4.1 Change FSA120 product name.
2.5 Correct the Kfactor equation of Basic Mode.
3.9.3 Update explanation of Name Plate.
7.7 Add the note when using analog and pulse output simultaneously.
10.1 Corresponds to output siganal code J (HART 5/HART 7 protocol).
Add analog output status at process abnormality (Option code /DG6).
Change FSA120 product name.
10.2, 10.3
Corresponds to output siganal code J (HART 5/HART 7 protocol).
9th Mar. 2012 3-3
7-5 to 7-6
10-5
10-6 to 10-7
10-9 to 10-10
3.9 Add note for blind plugs.
7.6.1, 7.6.3
Add the procedure for electrical connection code F (G1/2 female).
10.1 Change the Specification of “Degree of Protection” and
“Name plate and tag”.
10.2 Add the electrical connection code F, 5 and A.
Delete the mounting bracket code G.
10.3 Update the description.
Add the Explosion Protected Optional Specification for EJX930A
(FS15, KS2, CF1, SF2).
10th Aug. 2012 3-1
3-5 to 3-9
10-9 to 10-10
3.1 Change the name plate picture.
3.9.3 Revise the contents of ATEX flameproof approval and
type n declaration.
10.3 Replace /KF21 and /KU21 with /KF22 and /KU22.
11th June 2013 —
9-3
10-10
10-13 to 10-15
EJXMVTool → FlowNavigator
9.3.2 Error correction.
10.3 Change ATEX intrinsically safe to /KS26 from /KS25.
10.4 Add note for shrouding bolt.
12th Nov. 2013 — Add information for Modbus protocol type.