Acnt] [`gnd] [cnt1] [cnt2, Ity1] [ity2, Factory-diagnostics – Watlow Series 988 User Manual

Page 99

WATLOW Series 988 User’s Manual

6.9

Factory Menus, Chapter 6

Factory-Diagnostics

[acnt]
[`gnd]
[cnt1]
[cnt2]

Factory Use Only

These prompts are used only at the factory.

[Acnt] [`gnd] [cnt1] [cnt2] These prompts always appear.

Inputs 1 and 2 Module Types

Displays which input module is installed in the controller. Please doc-
ument this value before contacting the factory for technical assistance.

Input Types

• [none] No input module

• [``tc] Thermocouple only module

• [Curr] Current detect

• [SLid] Slidewire module

• [UOFF] Universal off

• [Urtd] Universal rtd

• [Utch] Universal high-gain thermocouple

• [UtcL] Universal low-gain thermocouple

• [UMu] Universal millivolts

• [UPrc] Universal process

• [`Ei2] Event input 2

[ity1] [ity2] These prompts always appear.

[ity1]
[ity2]