Watlow Series 988 - Manual (Page 85)

WATLOW Series 988 User’s Manual 5.11 Operation Menus, Chapter 5
Operation-PID A or B
Reset, Output 1A or 1B
Tune reset to eliminate the offset or droop between the set point and
the actual process temperature for PID output 1. When set to [```0]
reset is disabled.
[rE1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``US] and [Pb1A] is not set to [```0].
If Default
↓ ↓
[00)0] … [99(9] repeats/min.
[rE1A] [rE1A]
[`Pdr] [=0)0] % … [``)0] % … [10)0] %
[ALG0] [rE1A] [rE1A] [rE1A]
(Global Menu)
Integral, Output 1A or 1B
Tune integral to eliminate the offset or droop between the set point
and the actual process temperature for PID output 1. When set to
[```0] integral is disabled.
[It1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``S1] and [Pb1A] is not set to [```0].
Default
↓
[`)00] … [9(99] min. / repeat
[It1A] [It1A]
[rE1A]
[rE1b]
[It1A]
[It1b]
˜
NOTE:
The PID B Menu
appears only on
controllers with
enhanced software
(98_B-_ _ _ _-_ _ _ _).