Watlow CAS - Manual (Page 51)

Setup
CAS User’s Guide 41
Setup
The Setup menus let you change detailed configuration information.
How to Enter the Setup Menus
1. In Single Channel Display, select the channel you wish to edit.
2. While still in Single Channel Display, enter the pass sequence
below: Press Enter, Alarm Ack, Change Setpoint.
3. The first setup menu appears.
NOTE
If you are in the Setup menus and you don't make any changes for
three minutes, the CAS reverts to Single Channel Display for your
protection.
How to Edit a Menu
• Press Yes to select the menu or No to advance to the next menu.
• Press Yes or No to toggle between the option in your menu.
• Press Enter to store the value you have selected.
• If you decide not to edit the menu, press Back to stop editing and
return to the main menu.
Each display contains the default value for that specific menu, and
below each display, you will see the range of choices for that menu.
The following sections tell more about the submenus for each of the
four main menus. The next page shows the setup menus accessible from
Single Channel Display.
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
SETUP GLOBAL
PARAMETERS ?