Watlow CAS - Manual (Page 45)

Using the CAS
CAS User’s Guide 35
The Back key works like an "escape" key. Press it to:
• Abort editing.
• Return to a previous menu.
• Switch between single channel and job control displays.
Press the Enter key to:
• Store data or menu choices after editing and go to the next menu.
• Start scanning mode (if pressed twice).
Press Alarm Ack to:
• Acknowledge an alarm condition and reset the global alarm.
• Stops the scanning display
Press Alarm Reset to:
• Will clear an alarm when the process is in a non-alarming state.
• Will operate the same as the Alarm Ack key if the process is in an
alarming state.
Press Change SP to change the setpoints.
The FUNC key is not used in normal operation. It is reserved for future
enhancement.
Back
Enter
Alarm Ack
Alarm Reset
ALARM
RESET
Change SP
Func
FUNC