Change setpoint – Watlow CAS User Manual

Page 48

Text mode
Original mode

38 CAS User’s Guide

Using the CAS

Change Setpoint

To change the setpoint, go to the Single Channel Display of the channel
you want to change, and press the Change Setpoint key (the setpoint is
the desired temperature, pH, et cetera, for the process). You should see a
display like this:

•

Press Yes to change the setpoint.

•

Then press Yes or No to change the setpoint value.

•

When you are satisfied with the setpoint value you have chosen,

press Enter to save your changes and return to Single Channel Dis-
play; or

•

To return to Single Channel Display without saving your changes,

press No or Back.

CHANNEL PROCESS UNITS

CHANNEL NAME ALARM STATUS

03 SETPOINT ?
500 ° F