Watlow CAS - Manual (Page 46)

36 CAS User’s Guide
Using the CAS
Single Channel Display
Single Channel display (below) shows detailed information for one
channel.
From Single Channel Display,
• Press Yes to go to the next channel.
• Press No to go to the previous channel.
• Press the Back key once to go to Job display (if it is enabled).
• Press Enter twice to start Single Channel Scanning display. (The Sin-
gle Channel Scanning Display shows information for each channel
for one second.)
• Press any key to stop scanning mode.
CHANNEL PROCESS UNITS
CHANNEL NAME ALARM STATUS
02 347 °F
CHAN 01
Process Variable Engineering Units
Channel Number
Default Channel
Name