General wiring, Power wiring and system test, Connecting power and tb-50 to cas – Watlow CAS User Manual
Page 27
Installation
CAS User’s Guide 17
General Wiring
This section explains how to test your installation before you connect
power to it and how to connect inputs and outputs to it.
Power Wiring and System Test
When you have installed the system and the TB-50, use this checklist to
connect them. (These instructions are written so that non-electricians
can understand them. If you are an experienced electrician, they may
seem elementary to you. If so, feel free to skim them.)
Connecting Power and TB-50 to CAS
1.
Remove the temporary covers on the CAS housing.
2.
Connect the power supply. Do not turn on the AC power yet.
3.
Connect the ribbon cable to the system, as shown here. Plug it in so
the red stripe is on the left side as you face the back of the system.
4.
Connect the ribbon cable to the TB-50. The cable is keyed, so you
cannot insert it backwards.
R ed
Stripe
TB 1 -1 +
TB 2 -2
-
- 12LS Controller (111 pages)
- 8LS Controller (140 pages)
- 8PID Controller (55 pages)
- Addendum to EZwarePlus (50 pages)
- ANASCAN (62 pages)
- ANASOFT (95 pages)
- ANAWIN 2 (154 pages)
- ANAWIN 3 (23 pages)
- Calibrating Watlow Series 988 Family Process Controls (19 pages)
- CAS200 (124 pages)
- CLS (180 pages)
- CLS200 (251 pages)
- CLS200, MLS300 and CAS200 (92 pages)
- Control Console (12 pages)
- CPC400 (230 pages)
- DIN-A-MITE Style A (9 pages)
- DIN-A-MITE Style B (14 pages)
- DIN-A-MITE Style C (22 pages)
- DIN-A-MITE Style D (9 pages)
- DIN-Mount Adapter Instruction Sheet, Rev A (1 page)
- Dual DAC (4 pages)
- EM Gateway (28 pages)
- E-Safe Hybrid Relay Rev B (4 pages)
- E-SAFE II Hybrid Power Switch (4 pages)
- EZwarePlus Programming (264 pages)
- EZ-ZONE PM (111 pages)
- EZ-ZONE PM PID (125 pages)
- EZ-ZONE PM Express Limit (34 pages)
- EZ-ZONE PM Express (35 pages)
- EZ-ZONE PM Integrated Controller (181 pages)
- EZ-ZONE RM Limit Module Rev C (127 pages)
- EZ-ZONE RMA Modul (79 pages)
- EZ-ZONE RMC (236 pages)
- EZ-ZONE RME (124 pages)
- EZ-ZONE RMH (161 pages)
- EZ-ZONE RUI/Gateway (62 pages)
- EZ-ZONE RM-Scanner-Modul (140 pages)
- EZ-ZONE ST (97 pages)
- F4 External Event Board - Rev.B (2 pages)
- HG Series Mercury Displacement Relay (6 pages)
- LogicPro (296 pages)
- Mercury Relay or MDR Retrofit (13 pages)
- MICRODIN (24 pages)
- MICRODIN (106 pages)