Proface FP3900 - 19 Flat Panel" - Manual (Page 26)

Chapter 1 System Design
1-3
1.2 FP-3710T Series
The FP can be connected to Pro-face’s PS-2000B or to a Windows
®
compatible PC.
• The FP unit’s slide switches set the type of cable(s) used for sending touch data (USB or
RS232C).
SEE 6.1.1 Preset Settings and Adjustments for Dip Switch and Slide Switch (page6-2)
For Touch data transmission
USB Cable (FP-US00<5m>)
(A-B type Cable)
Or
RS-232C Cable(FP61V-IS00-O<5 m>)
Straight Cable: Dsub 9-pin female
For image signal output
DVI-D Cable
(FP-DV01-50 <5 m>, FP-DV01-100 <10 m>*)
(DVI-D 24-pin)
Or
Analog RGB Interface Cable
(FP-CV02-45<4.5m>)
(Dsub 15-pin male)
* The FP-DV01-100 can be used only when
connected to a PS-2000B or PL-3000B unit.
Touch Panel transmission
Image Signal Output
USB I/F
For downstream port of FP’s embedded
USB-HUB
(Type-A connector)
*FP3710-T41-U and FP3710-T42-U only
PS-2000B, PL-3000B
or Windows
®
Compatible PC
FP unit
Peripherals complied
with USB2.0/1.1
(Commercial products
such as USB
keyboards)
F
ront Si
de