Proface FP3900 - 19 Flat Panel" - Manual (Page 123)

FP3000 Series User Manual
5-14
‹ USB Cable Clamp Attachment Procedure
(1) Connect the USB cable to the connector.
(2) Insert the cable clamp into the cable clamp holder as shown in figure 1, and tighten the clamp until the
cable is secured in place.
‹ USB Cable Clamp Removal Procedure
(1) Push in the cable clamp’s stopper until the cable clamp is unlocked, then remove the clamp.
(2) Disconnect the USB cable.
USB Cable
Stopper
USB cable clamp holder
USB cable clamp
Figure 1