Proface APL3000B - Node Box PC User Manual
Page 92
Chapter 3 PL Monitoring Features
3-31
3.8.1
Voltage / Fan / Temperature / Backlight / DIN0 / DIN1
•
The Voltage, Fan, Temperature, Backlight and DIN1 tabs display the same setting items as the
DIN0 tab.
•
DIN1 tab cannot be set up when a checkmark is off in the [Enable] checkbox of Remote reset
tab. Remote reset feature, refer to the following section.
Item
Operation
Enable
When this option is checked, monitoring of the item
starts.
Error Action
Specifies the action(s) taken when the System Monitor
detects that the allowable range is exceeded. You need
to check [Enable] before you can select actions.
LED
The front LED lights orange.
Buzzer
Sounds a beep as an alarm.
•
Cannot be set up when a checkmark is put in the “OS
Shutdown” checkbox.
Popup Message
When PopupMessage is specified for the action, the
string entered into the entry field (Example: DIN0 Error)
will be displayed as a pop-up message. For the details
about the PopupMessage feature, refer to the following
section.
DOUT0 to 1
Output from the RAS port.
OS Shutdown
Shuts down the operating system.
•
The shutdown confirmation message is not displayed.
SEE
SEE