Proface APL3000B - Node Box PC - Manual (Page 57)

PL3000 Series Reference Manual
2-26
Clear all DMI event logs
Specifies whether all the recorded DMI event logs need to be deleted.
[No] Does not delete event logs.
[Yes] Deletes event logs.
Automatically reset to [No] after the data is initialized.
„ Soft Mirror Status
Displays and specifies the soft mirror status. Point the cursor to the [Soft Mirror Status] on the [Advanced]
screen and press the [Enter] Key to display the following screen.
Mirror System
Displays the soft mirror status.
[Unknown] Indicates the status that mirroring is not configured properly.
[Good] Indicates the status that the mirroring feature has performed properly.
[Reduced] Indicates the status that the mirroring feature has performed in only one HDD
because an error occurred in either of the two HDDs during normal operation.
Active Disk
Displays which drive is specified as the boot disk.
[Unknown] Indicates the status that mirroring is not configured properly.
[HDD 0] Indicates that DISK0(HDD0) is active.
[HDD 1] Indicates that DISK1(HDD1) is active.
[Both] Indicates that both HDD0(DISK0) and HDD1(DISK1) are active.
Clear Mirror Status
Specifies whether to delete the recorded soft mirror status at next boot-up.
[No] The recorded status is not deleted.
[Yes] The recorded status is deleted at next boot-up. The setting is reset automati-
cally to [No] after the status data is deleted. Normally, specify [No] for use.