Proface APL3000B - Node Box PC - Manual (Page 33)

PL3000 Series Reference Manual
2-2
2.1 System Setup Screen Operation
This section describes the operation of the BIOS setup screen.
(1) Connect a USB keyboard to the PL.
(2) Turn the PL’s power ON.
(3) After the boot-up screen comes up, press the [F2] key. The setup utility starts and the following screen
appears.
(4) To use the [
← ] [ → ] arrow keys, change the menu contents. A setting screen of each system will be
displayed.
(5) To use the [
↑ ] [ ↓ ] arrow keys, move up and down the cursor to select an item of the system, then con-
firm it by the [Enter] key.
(6) Change the value of the confirmed item with the [-] and [+] keys.
(7) To return from the sub layer to the main layer, press the [Esc] key.
• Normally, use only the factory (default) settings.
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set-up.
Press the [F1] key to display the help for the system setup.
Press the [F9] key to reset all settings to the default settings.
Press the [F10] key to save the settings and exit the system setup menu.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
Menu
Help area
Shows the information of
the items you selected.