Proface APL3000B - Node Box PC - Manual (Page 20)

Chapter 1 Setting Up Software
1-7
• The UPDD device driver has a driver to connect to USB devices built in by default setting.
UPDD settings are disabled by default setting for the PL3000 series box type. When connecting
the unit to the FP Series, these setting should be enabled.
(1) Click the icon shown above.
(2) Change the Enabled check mark from 8 to 9.
It is necessary to install the UPDD Serial driver when using the PL unit with a serial connection.
(1) From the [Start] menu, click [Programs], [UPDD], and then [Settings].
(2) Click [Add].
(3) Select [Digital TSC-1310D Series, Serial], and click [Next].
Follow the on-screen instructions to install the driver.
UPDD [USB Connection] settings disabled UPDD [USB Connection] settings enabled