Proface APL3000B - Node Box PC - Manual (Page 12)

11
„ Multi-display function types
‹ Twin
This allows the same information to be displayed on two monitors.
‹ Intel ®
Dual Display Clone
• Like the Twin type, this allows the same information to be displayed on two monitors, however,
display may differ according to the selected resolution.
• When using the TFT type or keypad type of the PL3000 series, if you use the Digital FP as a
dual clone monitor, use an RGB cable to connect the PL unit and the monitor. The TFT type and
keypad type of the PL series can output only RGB signals. To perform touch control on the
screen while dual clone display is active, use an RS232C cable to connect the PL unit and the
monitor, as well. Establishing a connection using an RS232C cable enables touch control on the
screen.
• When using the PL3000 series, if you are using a Digital FP with front USB terminal as a dual
clone/twin display monitor, you must use a USB cable, an RGB and an RS232C cable to connect
the PL unit and monitor.
Primary Device Secondary Device